ECYPH LLC Pinouts

Click here if you don't see the links on the left.

This page contains pinouts and technical information for various ECYPH LLC cables.

Use the links below to jump directly to specific cables.

PDCT5 Series

PDCT5-H9 PDCT5-M9-6 PLPT5-M9-6 PDCT5-F5W68HT

PDC65 Series

PDC65-M9-47HT-6

PDCT5-H9

PDCT5-H9 is powered by the device that the Palm is plugged into.  
It is powered from both the DTR pin and the CTS/RTS pins and is True RS232.
The CTS and RTS pins from the D-sub end are connected together.  
This product is electrically the same as a Serial Hotsync Cradle.
The cable length is 3 feet.

9 Pin Female Dsub Connector
#    Signal
1    n.c.
2    TX (Palm transmit)
3    RX (Palm receive)
4    DTR (DTR from PC - power, if available, is drawn from this pin)
5    GND
6    n.c.
7    RTS (RTS from PC - power, if available, is drawn from this pin)
8    CTS (CTS pin - connected to pin 7)
9    n.c.

PDCT5-M9-6 & PLPT5-M9-6

PDCT5-M9-6 and PLPT5-M9-6 are powered from the Palm.

PDCT5-M9-6    6 inch cable, True RS232
PLPT5-M9-6    6 inch cable, Low Power, Quasi-RS232

9 Pin Male Dsub Connector
#    Signal
1    n.c.
2    RX (Palm receive)
3    TX (Palm transmit)
4    DTR (asserts continuously whenever the cable is plugged into the Palm)
5    GND
6    n.c.
7    RTS (same as pin 4)
8    n.c.
9    n.c.

PDCT5-F5W68HT

PDCT5-F5W68HT is powered from the Palm.
It is True RS232.  The cable length is 3 feet.

9 Pin Female Dsub Connector
#    Signal
1    n.c.
2    TX (Palm transmit)
3    RX (Palm receive)
4    n.c. 
5    GND
6    DSR (asserts continuously whenever the cable is plugged into the Palm)
7    n.c.
8    CTS (same as pin 6)
9    n.c.

PDC65-M9-47HT-6

PDC65-M9-47HT-6 is Auto-Detecting and is True RS232.  
The cable length is 6 inches.

9 Pin Male Dsub Connector
#    Signal
1    n.c.
2    RX (Palm receive)
3    TX (Palm transmit)
4    DTR (asserts continuously whenever the cable is plugged into the Palm)
5    GND
6    n.c.
7    RTS (same as pin 4)
8    n.c.
9    n.c.

Copyright ©2014 ECYPH LLC. All rights reserved.
ECYPH® is a registered trademark of ECYPH LLC, a U.S. company.
All other trademarks and registered trademarks are owned by their respective owners.
For any comments or suggestions, please e-mail sales@pcables.com.